DJI O4 Air Unit | DJI Store Sofia
DJI O4 Air Unit | DJI Store Sofia

DJI O4 Air Unit
This product is no longer in stock
6941565997395
tax incl.
229,00лв. tax incl.
Highlights:
- 6km Digital Video Transmission
- 1080p/100fps Live View
- 4K/60fps Video
- 1/2-inch CMOS Sensor
- 117.6° Wide FOV
- Compatible With Various Goggles and Remote Controllers
Compatibility 1:
- DJI Goggles 3
- DJI Goggles N3
- DJI FPV Remote Controller 3
Compatibility 2:
- DJI Goggles 2
- DJI Goggles Integra
- DJI FPV Remote Controller 2
New product
Flagship FHD FPV Digital Video Transmission
The DJI O4 Air Unit Series marks a new leap in video transmission performance, delivering a cutting-edge digital video transmission solution with higher resolution, lower latency, and extended range. Weighing just 8.2 grams, the DJI O4 Air Unit features a 1/2-inch image sensor capable of capturing 4K/60fps video, offering both portability and versatility. Taking it a step further, the DJI O4 Air Unit Pro boasts an enhanced imaging capability with a 1/1.3-inch image sensor, capable of recording 4K/120fps video. It also supports impressive features such as 10-bit D-Log M color mode and a 155° ultra-wide FOV,[1] capturing the vast expanse of the world in unparalleled detail.
New Heights in Transmission, More Freedom in Flight
The DJI O4 Air Unit Series is equipped with the DJI O4 video transmission system, achieving ultra-low latency for more responsive controls. Paired with the dual-antenna design of the DJI O4 Air Unit Pro, the max transmission distance can reach up to 15 kilometers,[2] and the system can automatically select the most stable frequency. Whether soaring over mountains and rivers or navigating indoor spaces, you can perform confidently and with precision.
H.265 Video Transmission
1080p/100fps
Max Video Transmission Range
8 km[2]
Ultra-Low-Latency Video Transmission
15 ms[3]
Max Video Transmission Bitrate
60 Mbps[4]
Crisp and Fluid, Visually Striking
The DJI O4 Air Unit Series is capable of recording 4K/60fps video. The video transmission system utilizes H.265 video encoding, supporting high-frame-rate transmission at 1080p/100fps, ensuring clear and smooth real-time imagery. No matter how fast you fly, the camera view keeps up.
New Racing Mode: Unleashed Speed, Unlimited Fun
The DJI O4 Air Unit Series introduces a new Racing Mode,[5] with video transmission latency as low as 15 milliseconds.[3] It supports up to eight aircraft* racing simultaneously,taking you on an exhilarating, high-speed journey through the skies.
* Regulations vary by country and region, and actual performance may differ.
8km[2]
DJI O4 Air Unit Pro
Max Video Transmission Range
6km[2]
DJI O4 Air Unit
Max Video Transmission Range
Upgraded Imaging: Cinematic Masterpieces at Your Fingertips


The DJI O4 Air Unit features a 1/2-inch image sensor, capable of capturing 4K/60fps video. The DJI O4 Air Unit Pro goes a step further with a 1/1.3-inch image sensor, supporting 4K/120fps video recording.[1] No need for an external action camera to achieve ultra-wide-angle, high-definition footage. Creating stunning visuals has never been so effortless.
155° Ultra-Wide FOV
With a 155° ultra-wide FOV, easily navigate through complex terrains and capture breathtaking flight footage.
4K/120fps Video
Supporting 4K/120fps recording, it delivers high image quality and a smooth camera view, offering you a cinematic visual experience.
10-bit D-Log M Color Mode
Retains more details in highlights and shadows, giving you greater flexibility in post-production editing.
Multiple Stabilization Modes
With RockSteady, even high-speed flights maintain steady video capture. Additionally, it's compatible with the Gyroflow software for offline post-stabilization,[6] ensuring smooth and stable footage every time you fly.
Even in Intense Light, Create With Confidence
The DJI O4 Air Unit Pro Camera Module can be used with the DJI Avata 2 ND Filter Set (ND8/16/32).[7] Even in bright lighting conditions, it ensures balanced exposure and true-to-life colors. This allows you to flexibly control light intake and shutter speed, easily achieving natural motion blur and making your footage more dynamic and impactful.
Compatible With Canvas Mode: Your Flights, Your Way
You have full control over what's displayed on your screen. The DJI O4 Air Unit Series supports Canvas Mode and Betaflight OSD settings. You can customize the real-time data and layout displayed on your goggles screen, making flight data clear at a glance, and enhancing your control precision.
Lightweight Design, Effortless Adaptation
The DJI O4 Air Unit Series adopts a lightweight and portable design with extensive compatibility. Specifically, the DJI O4 Air Unit can fit drone frames of 2 inches and smaller, supporting flexible assembly to suit various creative flight scenarios. Experience the thrill of flying while capturing high-quality footage with ease.
DJI O4 Air Unit Pro
32g[8]
Air Unit Weight (camera module included)
25.6 × 20 × 23.3mm[8]
Camera Module Dimensions
33.5 × 33.5 × 13mm[8]
Air Unit Dimensions

DJI O4 Air Unit

8.2g [8]
Air Unit Weight (camera module included)
13.4 × 12.4 × 16.5mm[8]
Camera Module Dimensions
30 × 30 × 6mm[8]
Air Unit Dimensions
Compatible With Various Goggles and Remote Controllers[9]
Compatible with DJI Goggles 3 and DJI Goggles N3, and can be used with the DJI FPV Remote Controller 3.[10]

DJI Goggles 3

DJI Goggles N3
Also compatible with DJI Goggles 2 and DJI Goggles Integra, supporting use with the DJI FPV Remote Controller 2.[10]

DJI Goggles 2

DJI Goggles Integra
** When recording with a high resolution and high frame rate, the product may overheat and stop recording due to the relatively high power consumption. If this occurs, please return and land in time to cool down. Additionally, please take effective heat dissipation measures and avoid blocking ventilation holes.
- Notes:
- The DJI O4 Air Unit Pro supports an optional ultra-wide shooting mode. The 155° FOV is only available when Camera FOV is set to Ultra Wide, electronic image stabilization (EIS) is turned off, and the video frame rate is set to 60fps or below.
- Under FCC standards, in an open outdoor environment free of interference, the max video transmission range for the DJI O4 Air Unit Pro is 15 km. For the DJI O4 Air Unit, max video transmission range is 10 km.
- The DJI O4 Air Unit offers a lowest video transmission latency of 20 ms, while the DJI O4 Air Unit Pro achieves a lowest latency of 15 ms. These measurements were taken using DJI Goggles 3 in Racing Mode.
- Transmission bitrate with Racing Mode off. Measured in an open environment free of interference. Actual transmission bitrate varies depending on the operating environment.
- Enabling Racing Mode requires DJI Goggles 3 or Goggles N3. In this mode, the default video recording specification is set to 1080p/100fps, and the video transmission channel mode switches to Manual, offering bandwidth options of 20 MHz or 40 MHz. The channel selection supported in racing mode may vary based on regulations in different countries and regions.
- To use Gyroflow stabilization, turn off EIS in the goggles menu before flight and set Camera FOV to Wide to ensure that the footage is recognized by Gyroflow and stabilized effectively.
- Sold separately.
- The size and weight may be slightly different due to the configuration, manufacturing process, and measurement method; and the air unit weight of the DJI O4 Air Unit is without the lens mount. When including the lens mount, the weight is 9.2 grams.
- Compatible with DJI Goggles N3, DJI Goggles 3, DJI Goggles Integra, DJI Goggles 2, DJI FPV Remote Controller 3, and DJI FPV Remote Controller 2. These products are sold separately.
- The flight controller must be configured to support the SBUS protocol within the ground station to be compatible with the DJI FPV Remote Controller 3.
- The recommended frame size is for reference only. Always refer to the actual design and dimensions of your frame for accurate compatibility.
Technical specifications for DJI O4 Air Unit | |
---|---|
Air unit | |
Weight | Air Unit (camera module excluded): Approx. 5.1 g Air Unit (camera module included): Approx. 8.2 g* Antenna: Approx. 0.75 g * The lens mount is not included. With the lens mount, the weight is 9.2 grams. |
Dimensions | Transmission Module: 30×30× 6 mm (L×W×H) Camera Module: 13.44×12.36×16.50 mm (L×W×H) Coaxial Cable: 50 mm 3-in-1 Cable: 50 mm Antenna: 80 mm |
Video Transmission | |
Operating Frequency | 5.170-5.250 GHz 5.725-5.850 GHz Operating frequency allowed varies among countries and regions. Please refer to local laws and regulations for more information. |
Transmitter Power (EIRP) | 5.1 GHz: <23 dBm (CE) 5.8 GHz: <30 dBm (FCC) <14 dBm (CE) < 30 dBm (SRRC) |
Lowest Latency | With DJI Goggles 3 and pick racing mode: With 1080p/100fps video transmission quality, the latency is as low as 20 ms. With DJI Goggles N3 and pick racing mode: With 1080p/100fps video transmission quality, the latency is as low as 24 ms. With DJI Goggles 2 or Goggles Integra: With 1080p/100fps video transmission quality, the video transmission latency is less than 35 ms. Latency data represents the minimum latency during the screen refresh process of DJI Goggles.Tested in an outdoor open environment without interference. The video transmission latency data varies with different devices. |
Max Video Transmission Range | With DJI Goggles 3/DJI Goggles N3: 10 km (FCC), 6 km (CE), 6 km (SRRC) Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range under various standards . The actual maximum communication range during flight is limited by the flight endurance of the aircraft. Always pay attention to RTH reminders in the app during your flight. |
Live View Quality | 1080P@30/50/60/100fps |
Communication Bandwidth | Max 60 MHz |
Antenna | 1 antenna, 1T1R |
Channels | Supports auto mode Supports manual mode: With DJI Goggles 3 or DJI Goggles N3: 60 MHz: 1 channel; 40 MHz: 1 channels; 20 MHz: 3 channels; 10 MHz: 3 channel With DJI Goggles 2 or Goggles Integra: 40 MHz: 1 channel; 20 MHz: 3 channels; 10 MHz: 3 channels |
Channels Info | FCC/SRRC/CE: 60MHz/40 MHz: Channel 1: 5794.5 MHz 20 MHz/10 MHz: Channel 1: 5768.5 MHz Channel 2: 5789.5 MHz Channel 3: 5814.5 MHz |
Camera | |
Image Sensor | 1/2-inch CMOS Sensor |
Lens | FOV: 117.6° The equivalent focal length: 14 mm Aperture: f/2.8 Focus: 0.6 m to ∞ |
ISO Range | 100-6400 (Auto) 100-12800 (Manual) |
Video Resolution | 4K (4:3): 3840×2880@30/50/60fps 4K (16:9): 3840×2160@30/50/60fps 1080p (4:3): 1440×1080@30/50/60/100/120fps 1080p (16:9): 1920×1080@30/50/60/100/120fps |
Video Format | MP4 |
Max Video Bitrate: | 100 Mbps |
Color Mode | Normal Mode |
Camera FOV | Standard Wide-Angle |
EIS | RockSteady 3.0+ Stabilization function off (supports Gyroflow) When RockSteady is enabled, the shooting angle only supports standard. |
Hardware | |
Input Voltage | 3.7-13.2 V |
Operating Temperature | -10° to 40° C |
Storage | |
Built-in Storage | 23GB |
Supported SD Cards | Not supported |
Recommended microSD Cards | Not supported |
Compatibility | |
Supported Flight Controller System | Betaflight 4.3.0 and higher versions |
Supported DJI Goggles and Remote Controllers | DJI Goggles 3 + DJI FPV Remote Controller 3 DJI Goggles N3 + DJI FPV Remote Controller 3 DJI Goggles 2/Goggles Integra + DJI FPV Remote Controller 2 The flight control firmware needs to be configured to support the SBUS protocol in order to use the DJI FPV remote controller. |