Inspire 2 Drone + Zenmuse X5S Camera

Built-in upgrated micro 4/3 sensor in DJI Zenmuse X5S camera has a dynamic range of 12.8 f-stop, better signal to noise ratio and color sensitivity compared with X5R. Zenmuse X5S supports 8 standard micro 4/3 lens with a focal length of 9mm to 45 mm (equivalent 18-90 mm on a 35 mm camera) providing more flexibility. The new system image processing CineCore 2.0, built into drone DJI Inspire 2 allows DJI Zenmuse X5S shooting 5.2K video at 30 frames per second; 4K at 60 frames per second (H.264); 4K at 30 frames per second (H.265) and 100Mbps bitrate in CinemaDNG or Apple ProRes format. The camera was created for professional aerial imaging and supports continuous shooting in Burst mode with 20.8 MP.

Inspire 2 Aerial Imaging

The CineCore 2.0 image processing system is integrated in the Inspire 2 camera drone body. This way the sensor is protected from processor magnetic interference for better image and video quality. New generation cameras are more compact and lightweight, each of it can use the powerful integrated CineCore 2.0 technology.

Improved Micro 4/3 Sensor

The built-in Micro 4/3 sensor has been upgrated which means better image quality. With a 20.8 MP sensor you can create more detailed images than with the previous sensor (pixel size 3.4 μm). DJI Zenmuse X5S camera features a 12.8 f-stop dynamic range, better signal to noise ratio and color sensitivity compared with the Zenmuse X5R camera - this allows X5S to capture more clear shots even in low light environments.

Compatible Lenses

The DJI Zenmuse X5S camera support up to 8 professional* lenses with a focal length of 9mm to 45mm (equivalent 18-90 mm on a 35 mm camera) provide more opportunities for the photographers.

Compatible lenses: Olympus M.Zuiko 12mm/2.0; DJI MFT 15mm/1.7 ASPH; Olympus M.Zuiko 17mm/1.8; Panasonic Lumix 15mm/1.7; Olympus M.Zuiko 25mm/1.8; Panasonic Lumix 14-42mm/3.5-5.6 HD; Olympus M.Zuiko 45mm/1.8; Olympus M.Zuiko 9-18mm/4.0-5.6.

*A balancing ring required for some lenses. More compatible lenses will be available.

Hollywood-grade Video

Thanks to CineCore 2.0 technology the DJI Zenmuse X5S camera can record video with a maximum resolution of 5.2K/30 in CinemaDNG format and 12 bit, 5.2K/30 in Apple ProRes 422 HQ format and 4K/30 in Apple ProRes 4444 XQ format (no alpha). More video recording options: 4K/60 (H.264) or oversample of 4K/30 (H.264/H.265) with 100Mbps bitrate.

Lossless In-video Single and Burst Photo Capture

When you are using a memory card for storage, 20.8 MP images can be captured in JPEG + DNG format with 14 fps in Burst mode. When you are using CINESSD you can save the stills in DNG format with 20 fps Burst mode with a maximum 20.8 MP image resolution. Stills can also be taken during video recording without interruption of the video.

Better Camera Stabilization

Thanks to its lightweight construction and powerful processor the DJI Zenmuse X5S gimbal motors are super-reactive. 3-axis gimbal stabilization reacts in real time of all camera movements – that helps X5S to be always well positioned. With 0.01˚ precision, combined with three damping balls and lightweight damping boards the gimbal neutralizes any vibration. Thanks to the integrated wires can be rotated at up to 360˚.

Long Range Camera and Focus Control

The DJI GO app will allow you to take control over every detail remotely - focus, aperture or format. DJI Focus is able to manage the focus easily, and new built-in Lightbridge technology allows a signal transmission to a maximum distance of 3.5 km.

Beyond Imagination

The newest Inspire is already here! DJI Inspire 2 Droneis significantly better than its predecessor Inspire 1. The second version of Inspire enables capturing 5.2K videos in Cinema DNG RAW, Apple ProRes an other formats. The camera drone accelerates from 0 to 80 kph in 4 seconds and the max speed that can reach is 94 kph. The Inspire 2 can descent with max speed of 9 mps, which is an incredible achievement for DJI Inspire 2 developers. The system of two intelligent flight batteries allows the drone to stay in the air for 27 min. (with camera X4S), and the heating battery system enables it to fly at very low temperatures. FlightAutonomy system was developed for DJI Inspire 2 providing two directions for obstacle avoidance.

About the Inspire 2

The DJI Inspire 2 design is achieved by an аluminium alloys with magnesium. The drone has Vision Sensing System and 2-axis FPV camera. On the drone can be mounted different models of 3-axis gimbals with built-in camera. For more safety flight Inspire 2 developers have provided a second battery, which will start to operate in the event that the level of the first battery reach critically low levels or fails, to allow the DJI Inspire 2 camera drone to land safety. Battery heating system allows the drone to fly at very low temperatures.

Image processing

The DJI Inspire 2 camera drone allows you to take videos with 5.2K resolution @ 4.2Gbps and 4K resolution @ 100Mbps. Supported video formats are CinemaDNG, Apple ProRes, etc., and supported video codecs are H.265 and H.264. Created videos can be stored simultaneously on a DJI CINESSD and a microSD card.

Remote Controller

The DJI Inspire 2 remote controller has a built-in Lightbridge 2 technology. It can operate at 2.4 GHz or 5.8 GHz frequency. The master-slave mode means that there may be a master remote controller which can be used to control the drone and several secondary remote controllers for camera control. The DJI Inspire 2 remote controller has a HDMI and a USB port, and its range reaches up to 3.5 km.

Professional Image Quality

The newest CineCore 2.0 system allow you to take amazing 5.2K* videos in CinemaDNG* or Apple ProRes* format. CineCore 2.0 is integrated in the nose of DJI Inspire 2 and can operate with any camera connected through dedicated gimbal port. *Additional licenses required.

Obstacle Avoidance System

DJI Inspire 2 camera drone has a few obstacles sensing sensors which scanning 30 meters ahead it, allowing Inspire 2 to fly safety with a speed of 54 kph. Infrared sensors located at the top of the drone scan for obstacles five meters above the drone – that allow it to fly safety indoors. The system is active during normal flight, RTH and all intelligent flight modes. The sensors are the core of the FlightAutonomy system – this protection system taking care of the safety of drone during flight.

Spotlight Pro

In this flying mode the pilot can capture complex, unique footage. The Spotlight Pro mode uses a series of algorithms, thanks it the Inspire 2 camera drone began to follow the specified object, no matter which direction it fly. In Quick Mode you can select the tracing object, and in Composition Mode you can choose the subject and its position. When the subject is positioned at the specified location you should just touch the screen and tracking will starts. The camera can be rotated in the desired direction to create amazing images. Spotlight Pro is active in all flight modes, including ActiveTrack, TapFly, Waypoint and Point of Interest.

TapFly

The 2-axis onboard FPV camera is designed to monitor the flight and it is used when the TapFly mode is activated. Just with one tap on the mobile device screen you can set the flight direction of the drone. This way the operator can focus on gimbal movement.

ActiveTrack

ActiveTrack mode allows DJI Inspire 2 camera drone to recognize and track a number of objects, including people, bikes, cars or boats. The profiles can be adjusted depending on the selected tracking object, which means that you get more precision when using this mode.

Smart Return to Home

The forward and backward vision positioning systems allow DJI Inspire 2 to create a map of the route during the flight. If the signal is lost, and the Smart Return to Home mode is enabled, the drone will return to the home point along its original route. When the signal regains Inspire 2 will continue to return in a straight line to the home point. On its way back the Inspire 2 uses the main camera to detect potential obstacles 200m in front of it, which allows the drone to plan a safe route.

Master-Slave Mode

The new wireless HD images transmission technology sends the video signal from the main remote control to slave, as they may be located at a distance of 100 meters from each other without losing signal quality.

Improved Flight Performance

The new propulsion system allows the DJI Inspire 2 camera drone to fly at a maximum speed 94 kph, to descend with 9 mps and climbs with 6 mps. The inspire 2 can accelerates from 0 to 80 kph in just 4 seconds and a maximum flight angle 40˚.

Precisely adjusted two remote controllers helps you to manage the drone more accurate and easy. Thanks to the new propulsion system the Inspire 2 can fly at 2500-5000 m above sea level (with additional improved propellers).

The intelligent flight batteries with built-in heating system allow drone to fly at extremely low temperatures (-20˚C) - which, until now, was impossible.

More Reliability

The reliability of DJI Inspire 2 Drone has been improved twice thanks to built-in IMU and barometer. The intelligent flight control system monitors redundancy system and provides reliable information about the flight.

The new obstacle sensing system reduces the risk of collision for DJI Inspire 2 Drone. Thanks that system the drone will be able to avoid obstacles on its route.

The system of two intelligent flight batteries allows DJI Inspire 2 to land safe even a problem with one of batteries occurs. In this situation the second battery will be activated and will provide enough power for the safe landing of the drone.