0
DJI Spark Drones

Spark

DJI Mavic Drones

Mavic

DJI Phantom Drones

Phantom

DJI Osmo Series

Osmo

DJI Goggles

Goggles

DJI Inspire Drones

Inspire

DJI Ronin Gimbals

Ronin

Enterprice Drones

Industrial

Agras Drones

Agras Drones

Tello Drones

Tello

Robomaster

RoboMaster

DJI Care

DJI Care

Agras Drones | DJI Store Sofia

Agras Drones | DJI Store Sofia

DJI Agras MG-1S Agriculture

Agras MG-1S Agriculture Drone

In stock!

  • DJI Agras MG-1S is a professional agriculture drone which has a number of advanced DJI technologies for processing crops with liquid pesticides or fertilizers;
  • It can carry up to 10kg of liquid pesticides;
  • It has 4 spray nozzles;
  • There are now three spraying modes: forward spraying, backward spraying and full spraying;
  • Convenient for transport thanks to folding shoulders;
  • With an intelligent DJI Agriculture Management Platform.

Contact us for prices and quantities

More details

Agras MG-1S Drone

Agras MG-1S

The new drone DJI Agras MG-1S integrates a number of cutting-edge technologies, including the new A3 Flight Controller, and Radar Sensing System which provides extra reliability during flight. The MG-1S is high efficient aircraft capable of offering comprehensive solutions for agricultural care.

Agras MG-1S with A3 Flight Controller

A3 Flight Controller

The new improved A3 Flight Controller of DJI gives you high reliability. Its algorithms are optimized for agricultural purposes to provide a stable flight even when handling liquid pesticides. If an error occurs in one sensor, the system will automatically switch to the other sensor to continue safe, reliable flight.

Agras MG-1S with Radar Sensing System

Radar Sensing

Three high-precision, microwave radars are placed on the front slope, rear slope and the bottom slope. The front and rear radars detect the terrain, that allowing the drone to precisely adjust its height. As the radar's scan, the MG-1S is able to perceive the change of terrain, adjust its altitude and maintain its altitude above the crops.

Agras MG-1S with Precision Spraying

Precision Spraying

The agricultural drone DJI MG-1S has a new, precise cropping system that provides greater precision through two compatible pumps that control the front and rear pair of nozzles separately. There are added three spraying modes available: forward spraying, backward spraying and full spraying. The new pressure sensor and flow sensor monitor real-time spraying speed by performing dynamic control over the speed and amount of spray during operation. Nozzles have expanded spraying pipes for better use of downward airflows. The new DJI Agras MG-1S spraying system responds exactly to user-generated commands and ensures accuracy and efficiency at work.

Agras MG-1S with Intelligent Operation Planning System

MG Intelligent Operation Planning System

With DJI MG-1S drone you can plan and edit flight paths intelligently. By setting the amount of liquid required for each area, the drone automatically calculates the remaining parameters for better efficiency and convenience for you. For various operational needs, DJI Agras MG-1S allows you to choose between effective and intense spraying.

Remote Controller Agras MG-1S

Professional Controller

The professional controller of DJI Agras MG-1S has a bright 5.5-inch display with Full HD resolution and it is visible even under strong sunlight. With a built-in operation planning system, users can use the controller to improve the work efficiency. The battery of the controller supports a working time up to 5 hours, enabling long-time outdoor operations.

Agriculture Management Platform Agras MG-1S

DJI Agriculture Management Platform

DJI Agras MG-1s provides a comprehensive spraying management platform. With the platform, you can supervise the flight status of every aircraft, master spraying status and manage your spraying team to improve working efficiency. You can also assign fields to each operator and check deployed fields. By sharing the intelligent operation planning system for each operator the managing each operation will be more efficient and economy to avoid repeated spraying.

Landing Gear Agras MG-1S

Optimized Mechanical Structure

The frame arm of the MG-1S is detachable, and the landing gear is optimized to reduce maintenance costs. To protect the ESCs is added a waterproof coating which prevents them from penetrating moisture or liquids. The liquid valve has been placed on the side of the delivery pump, and the delivery pump is located above the spray tank. Thanks to this, cleaning of liquids is much easier and more convenient.

Intelligent Flight Battery Agras MG-1S

Intelligent Flight Battery

The DJI Agras MG-1s has an intelligent flight battery with a capacity of 12000mAh and it hovers for 22 minutes acquired at sea level. A high-strength protective shell and dampers are applied outside the battery. The cables are also well-protected for safety and reliability. The battery provides more stable voltage, extending its lifespan.

Battery Charging Hub Agras MG-1S

Battery Charging Hub

The Charging Hub is specially designed to connect up to 6 batteries. Each intelligent balancing charger can connect 2 charging hubs. In total 12 batteries can be connected and charged in sequence, that saving the trouble of replacing the batteries for charging. It can balance the voltages for each battery when they charging, that allow a longer battery life.

Technical Specifications for agriculture drone DJI Agras MG-1S
DJI Agras MG-1S
Diagonal Wheelbase1515 mm
Frame Arm Length
  • 625 mm;
  • 1471 mm x 1471 mm x 482 mm(arm unfolded, without propellers).
Dimensions
  • 1471 mm x 1471 mm x 482 mm (arm unfolded, without propellers);
  • 780 mm×780 mm×482 mm (arm folded).
SPRAY SYSTEM
LIQUID TANK
Volume10 L
Standard Operating Payload10 kg
Max Battery Size151 mm x 195 mm x 70 mm
NOZZLE
Model
  • XR11001VS (0.379 L/min)
Recommend Model
  • XR110015VS (0.591 L/min)
  • TK-VK6 (0.393 L/min)
  • TK-VK8 (0.525 L/min)
Quantity4
Droplet SizeXR11001VS : 130 - 250 μm (subject to working environment and spraying speed)
FLIGHT PARAMETERS
Total Weight10 kg (without battery)
Standard Takeoff Weight23.8 kg
Max Takeoff Weight24.8 kg (at sea level)
Max Thrust-Weight Ratio1.71 (with 23.8 kg takeoff weight)
Power BatteryDJI Designated Battery (MG-12000S)
Max Power Consumption6400 W
Hovering Power Consumption3800 W(with 23.8 kg takeoff weight)
Hovering Time
  • 22 min (12000 mAh & 13.8 kg takeoff weight);
  • 10 min(@12000 mAh & 23.8 kg takeoff weight)
Max Operating Speed7 m/s
Max Flying Speed12 m/s(P & F Mode,with GPS);15 m/s (A Mode)
Max Service Ceiling Above Sea Level2000 m
Recommended Operating Temperatureот 0°C to 40°C
REMOTE CONTROLLER
ModelDLG60A
Operating Frequency2,400 GHz to 2,483GHz
Max Transmission Range1 km (unobstructed, free of interference)
EIRP≤20 dBm
Built-in Battery2S LiPo; 9000 mAh
Output Power7 W
Operating Temperature Rangefrom -10°C to 40°C
Storage Temperature Range
  • Less than 3 months: -20°C to 45°C
  • More than 3 months: 22°C to 28°C
Charge Temperature Rangefrom 5°C to 40°C
RADAR MODULE
Detection Range1 - 5 m
Working Range1.5 - 3.5 m
Precision< 10 cm
REMOTE CONTROLLER CHARGER
ModelA14-057N1A
Voltage17.4 V
Rated Power57 W
PROPULSION SYSTEM
Motor
Stator Size60 x 10 mm
KV130 rpm/V
Max Thrust5.1 kg/rotor
Max Power770 W
Weight (with cooling fan)280 g
FOLDABLE PROPELLER
MaterialHigh-performance engineered plastics
Diameter / Pitch533 x 178 mm (21 x 7 inch)
Weight58 g
ESC
Max Allowable Current (Continuous)25 A
Operating Voltage12S LiPo, 50.4V
Drive PWM Frequency12 kHz
AccessoriesAgras MG-1S
Agras MG-1SAgras MG-1Sx 1
Landing Gear LeftLanding Gear (Left)x 1
Landing Gear RightLanding Gear (Right)x 1
Remote ControllerRemote Controllerx 1
Remote Controller ChargerRemote Controller Chargerx 1
Power CablePower Cablex 1
Remote Controller LanyardRemote Controller Lanyardx 1
Micro USB CableMicro USB Cablex 1
Anti drop PlateAnti-drop Platex 2
Propeller Blade CWPropeller Blade (CW)x 4
Propeller Blade CCWPropeller Blade (CCW)x 4
Propeller HolderPropeller Holderx 4
Air FilterAir Filterx 1
Hose ClipHose Clipx 1
Power Plug SetPower Plug Setx 1
Hex Keys
  • Hex Keys 1.5mm
  • Hex Keys 2.5mm
  • Hex Keys 3.0mm
  • x 1
  • x 1
  • x 1
Screws Nuts and WashersScrews, Nuts, and Washers: M3 x 6, M3 x 10, M3 x 18, M4 x 22
Spray TankSpray Tankx 1
Sprinkler KitSprinkler Kit (With XR11001 Nozzles)x 2
Hose Clamps
  • Hose Clamps A (Ø 11mm):
  • Hose Clamps B (Ø 8.4mm):
  • Hose Clamps C (Ø 7.8mm):
  • x 4
  • x 10
  • x 4
FenderFenderx 1
Spray Tank PlugSpray Tank Plugx 2
Screws and NutsScrews and Nuts: M3 x 5, M3 x 10, M4 x 8, T3 x 8

Related Products